 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DXM (1.27MM PITCH) SERIES HIGH-DENSITY I/O CONNECTOR General DXM series high-density I/O connectors with bellow contacts are perfect for tomorrow's miniaturized electronic devices. This new 1.27mm (0.050") interconnect design ensures positive locking, effortless coupling, terminal protection and EMI reduction in a miniaturized and rugged package. DXM series offer you one of the most varied and complete lines of High-Density connectors in the world, i.e. IDC and Solder for the plug and right angle dip, straight dip, IDC and SMT for the receptacle. Available in 14, 20, 26, 36, 50, 68, 80, 100 and 110 way. Features 1. 1.27mm (0.050") contact spacing conserves valuable board space and permits ultra-high density designs. 2. Bellow contacts create smooth and precise mating and unmating. 3. Unique shell design assures first make/last break grounding and overall noise protection. 4. IDC termination allows quick and low cost termination to AWG #28 wires. 5. Backshell and receptacle shell are made of diecast zinc alloy or stainless steel to reduce the penetration of external EMI noise. 6. Ferrite added to DX Right Angle Dip Type for EMI Protection is available. 7. Overmold backshell provided for ESD protection is available in 'One-Touch' locking and 'Screw' locking. 8. Termination methods are available in IDC, Soldering, Right Angle Dip, Straight Dip and SMT. Application Office Autmation, Computers, Measurement, Communication and Control Equipment, Factory Automation, Home Automation and other commercial applications needing high density interconnections. Specifications 04/2009 223 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DXM Series Variations One-touch lock type (14, 20, 26, 36, 50, 68 pins) Plug cover 1.1 Over mold cover type Plug 2.1 IDC type Receptacle 3.1 Right angle dip 3.2 Right angle dip 3.3 Right angle dip 5.1 Straight dip type 6.1 IDC type (68 pins) 224 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Screw lock type (68, 80, 100, 110 pins) Overmold cover type (100, 110 pins) Plug cover 7.1 Over mold cover type Plug 2.1 IDC type Receptacle 8.2 Right angle dip 9.1 Right angle dip 13.1 Straight dip (110 pins) Die cast cover (68, 80, 100 pins) Plug cover 7.2 Die cast cover type Plug 2.1 IDC type Receptacle 8.1 Right angle dip 8.3 Right angle dip Note: There is no interchangeability between the locks of the die cast cover type and overmold type. 11.1 Straight dip type 12.1 IDC type (68 pins) 04/2009 225 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1. One Touch Lock Plug Cover Ordering Information Material Treatment (1) (2) (3) 1) Series number: DX30M 2) No. of pins: 14, 20, 26, 36, 50, 68 3) Cover case type CV: Over mold cover case 1.1 Overmold Cover o o o o o General List of Engagement Combinations 226 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2. Plug Unit (Interchangeable One Touch-Screw Lock Type) Ordering Information Material Treatment (1) (2) (3) (1) (4) (5) 1) Series No.: DX--M 2) Wiring style 30: Discrete cable IDC (for fine wire use) 3) Applicable wire A: AWG#28 (Discrete cable press-fit type) 4) No. of pins: 14, 20, 26, 36, 50, 68, 80, 100, 110 5) Mating type P: Plug Applicable 2.1 Discrete Cable IDC Type (for Fine Wire) 04/2009 227 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 3. One Touch Lock, Receptacle Right Angle Type Ordering Information 4) No. of pins: 14, 20, 26, 36, 50, 68 5) Mating type S: Receptacle 6) Board-fitting type Blank : Screw on type E : Lock pin type 7) Individual specifications (50) :Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) (7) 1) Series No.: DX--M 2) Wiring style 10: Right angle type 3) Lock style (one touch lock type) Blank : (Receptacle case material: zinc alloy die cast) G : (Receptacle case material: steel) Material Treatment 3.1 Board Screw on Type 3.2 Board Lock Pin Harpoon Type 228 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 3.3 Board Lock Pin Round Type PCB Layout (Recommended board thickness:1.6mm) (20, 36, 68 pins) (14, 26, 50 pins) Panel-Fitting Dimensional Drawing (Recommended panel thickness:max. 1.6mm) 04/2009 229 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 5. One Touch Lock, Receptacle Straight Type Ordering Information 4) Number of positions: 14, 20, 26, 36, 50, 68 5) Type of aperture S: Receptacle connector 6) Individual specifications (50): Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) 1) Series number: DX-M 2) Wiring style 20: Straight dip 3) Lock style Blank: One Touch Lock Type Material Treatment 5.1 Receptacle Straight Type Connector mounting condition Note: Fasten the printed circuit board with screws using a tightening torque of 0.3 to 0.4 N.m. PCB Layout (Recommended board thickness:1.6mm) Panel-Fitting Dimensional Drawing (Recommended panel thickness:max. 1.6mm) (20, 36, 68 pins) (14, 26, 50 pins) 230 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 6. One Touch Lock Receptacle Flat Ribbon Cable Type Ordering Information 4) No. of pins 36, 50, 68 5) Mating type S: Receptacle 6) Individual specifications (50):Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) 1) Series No.: DX--M 2) Connector style 33: Flat IDC type (for ribbon cable use) 3) Applicable cable A: AWG#28 Material Treatment 6.1 Receptacle, Flat Ribbon Cable Type Panel-Fitting Dimensional Drawing (Recommended panel thickness:max. 1.6mm) 04/2009 231 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 7. Screw Lock Type, Plug Cover Ordering Information Material Treatment (1) (2) (3) 1) Series No.: DX30M 2) No. of pins: 68, 80, 100, 110 3) Cover case type CV1: Overmold cover case CV2: Die cast cover 1.1 Overmold Cover List of Engagement Combinations 232 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 7.2 Die Cast Cover List of Engagement Combinations 04/2009 233 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 8. Screw Lock, Receptacle Right Angle Type Ordering Information 5) Mating type S: Receptacle 6) Board fitting type Blank : Screw on type E : Lock pin round type E1 : Lock pin harpoon type (Board thickness 1.6mm) E2 : Lock pin harpoon type (Board thickness 1.2mm) 7) Individual specifications (50) :Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) (7) 1) Series No.: DX--M 2) Connector style 10: Right angle type 3) Lock style (Screw lock type) A: Receptacle case material Steel B: Receptacle case material Zinc alloy die cast 4) No. of pins: 68, 80, 100, 110 Material Treatment 8.1 Board Screw on Type 8.2 Board Lock Pin Harpoon Type 234 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 8.3 Board Lock Pin, Round Type PCB Layout (Recommended Board Thickness:1.2mm, 1.6mm) (68, 80, 100 pins) (110 pins) Panel-Fitting Dimensional Drawing DX10BM DX10AM 04/2009 235 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 9. Screw Lock, Receptacle Ferrite Core Type Ordering Information 5) No. of pins: 100 6) Mating type S: Receptacle 7) Board fitting type E1: Lock pin type (Board thickness 1.6mm) 8) Individual specifications (50): Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) (7) (8) 1) Series No.: DX--M 2) Connector style 10: Right angle type 3) Lock style (Screw lock type) A: Receptacle case material-steel 4) Board mounting style F: Ferrite core type Material Treatment 9.1 Right Angle Ferrite Core Type PCB Layout (Recommended Board Thickness:1.6mm) Panel-Fitting Dimensional Drawing DX10AMF 236 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 11. Screw Lock Receptacle Straight Type Ordering Information 4) No. of pins: 68, 80, 100 5) Mating type S: Receptacle 6) Individual specifications (50): Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) 1) Series No.: DX--M 2) Connector style 20: Straight dip 3) Lock style B: Screw lock type Material Treatment 11.1 Receptacle Straight Type PCB Layout (Recommended Board Thickness:1.6mm) Panel-Fitting Dimensional Drawing DX20BM 04/2009 237 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 12. Screw Lock Receptacle, Flat Ribbon Cable Type Ordering Information 5) Mating type S: Receptacle 6) Board fitting type LNA: Screw lock type 7) Individual specifications (50) :Dip portion gold plated (1) (2) (3) (1) (4) (5) (6) (7) 1) Series No.: DX--M 2) Connector style 33: Flat IDC type (for ribbon cable) 3) Applicable wire A: AWG#28 4) No. of pins: 68 Material Treatment 12.1 Receptacle, Flat Ribbon Cable Type Panel-Fitting Dimensional Drawing DX33AM 238 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 13. Plug Straight Type Ordering Information Material Treatment (1) (2) (1) (3) (4) 1) Series No.: DX--M 2) Connector style 20E: Straight dip 3) No. of pins: 110 4) Mating type P: Plug 13.1 Plug Straight Type PCB Layout (Recommended Board Thickness:1.5mm) Diagram of Mounting Conditions for DX20EM Note: Secure the connectors and boards of this product to the panel. Panel-Fitting Dimensional Drawing (Recommended Panel Thickness:Max.1.5mm) List of Engagement Combinations 239 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Connecting Method (Discrete Cable IDC Type) Connecting Tools List of Connecting Jigs and Accessories Plug Connector Plug Connector Receptacle Connector 240 04/2009 |
Price & Availability of DX30AM-100P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |